直紋拉絲鋁板：在鋁板外表用機械磨擦的辦法加工出直線紋理，具有刷除鋁板外表劃傷和裝修鋁板外表的兩層效果。直紋拉絲有接連絲紋和斷續絲紋，銜接拉絲可用百潔布或不銹鋼刷經過對金屬外表接連水平線沖突獲取。改動不銹鋼的鋼絲直徑，可獲得不同粗細的紋理。
Straight line drawing aluminum plate: straight line texture is machined on the surface of the aluminum plate by mechanical attrition. It has the two effect of removing the scratch and decorating aluminum plate surface. The straight line wire has a continuous thread and a intermittent thread. The connecting drawing can be obtained by the conflict of the horizontal line between the metal and the metal surface, which can be used by a 100 cleaning cloth or a stainless steel brush. The diameter of stainless steel wire can be changed and the texture of different thickness can be obtained.
亂紋拉絲鋁板：亂紋拉絲鋁板是在高速工作的銅絲刷下，鋁板前后左右沖突所獲得得一種無規則、無顯著紋理的亞光絲紋鋁板。
Random pattern wire drawing aluminum plate: The Striped wire drawing aluminum plate is a kind of irregular and non textured sub gloss silk aluminum plate under the high-speed working copper wire brush and the aluminum plate collision.
波紋拉絲鋁板：波紋拉絲鋁板一般是在刷光機和擦紋機上制造，使用上組磨輥的軸向運動，在金屬外表磨刷，得出波浪形的紋理。
Corrugated wire drawing aluminum plate: corrugated wire drawing aluminum plate is usually made on brushing machine and rubbing machine. The axial movement of grinding roller is used to polish the metal surface and get the wavy texture.

旋紋拉絲鋁板：旋紋拉絲鋁板是選用毛柱狀毛氈或研石尼龍輪裝在鉆床上，用火油和拋光油膏，對金屬外表進行旋轉拋磨所獲得的一種絲紋，它多用于圓形標牌和小型裝修形表盤的裝修性加工。
Twistcore drawing aluminum: twistcore drawing aluminum is made of wool or nylon felt columnar grind stone wheel is arranged on the drilling machine, the use of fire and polishing of metal surface ointment, rotating polishing a thread obtained, it is used for the decoration of a circular dial shaped signs and small decoration.
螺紋拉絲鋁板：螺紋拉絲鋁板是用一臺在軸上裝有圓形毛氈的小電機，將其固定在桌面上，與桌子沿成60度的視點，使用毛氈的旋轉與拖板的直線移動，在鋁板外表旋擦出寬度一致螺紋紋理。
Thread drawing aluminum: thread drawing aluminum is a circular felt the shaft is provided with a small motor, which is fixed on the table, and the table along the 60 degree view, linear moving and rotating and carriage of the felt is used, in the aluminum surface of rotary brush width consistent thread texture.